Unrivaled for sheer power, size and performance, this planer does the job for you! Powerful 10.9 Amps Makita motor lets the blade make 30,000 cuts per minute. For continuous operation, simply click the lock-on button. Cutting Width (in.): 6 3/4, Cuts Per Minute (CPM): 30,000, Rated RPM: 15,000, Amps: 10.9, Case Included: Yes

The new PM15 from Powermatic is loaded with features that make it a standout. Large 5HP motor gives the unit 15" wide planing capacity and enough power to run double knife sets for molding. The stand is fully enclosed and is equipped with integral casters for shop mobility. Two feed speeds, 10 and 20 fpm's allow you to run quickly for maximum stock removal yet slower speeds yield a fine milled finish on decorative moldings. Opening the hinged top with 4" dust collection port exposes the cutterhead, allowing for fast and easy tooling changes. This machine can use either single molding knives or 3 knife sets, whichever you choose. A long list of available accessories will make this machine a valuable addition to any shop.

HOOD ASSY P12RA P12R P100RA

Includes stand with four lockable casters. 13-inch width and 6-1/8-inch thickness planing capacity and molding capabilities. Sturdy cast-iron table is mounted on four precision-ground steel columns. Fully adjustable rubber-coated infeed and outfeed rollers. 1-1/2 hp motor, located at the base of the machine, is fully enclosed and fan-cooled. Two matched V-belts deliver full power to the three-knife cutterhead. The two-speed gear box provides smooth molding and fast planing. JET offers over 40 styles of molding cutters. The high-quality tool steel of the three steel knife sets will provide a superior finish. All cutters less than 2 inches wide can be installed without removing the planing knives.

JET's planer/molder handles material up to 13 inches wide and up to 6 inches in height. The tool's 1-1/2-horse, 110-volt motor (you can easily rewire it to 230 volts) spins the three-knife cutterhead. Depending on the application, the machine runs 10 to 20 board feet per minute. The motor is fan-cooled and enclosed, too, so it doesn't overheat and stays protected from dust. The cast-iron table lends plenty of heft and contact surface, while the rubberized infeed and outfeed rollers support the work without marring it. As is standard with most planers, it comes with an incorporated dust chute--so it's simple to hook up to a dust collector and keep the shop clean. Four lockable casters (not standard) make it easy to maneuver the tool in a tight shop. For people working in home restoration, this tool is a godsend. To match new replacement molding with the existing material, copy the profile of the existing molding, get custom knives made, and cut your own replacement. A helpful video is included that walks you through the process of changing and setting blades. This is unquestionably a solid tool, ideal for home woodworkers looking to step up from a benchtop unit, and especially for remodelers and This Old House-type guys who need an good way to accurately match existing trim. --Jon Groebner

Includes 15S 15" Deluxe Planer - 1791210, Spiral Cutterhead w/ (3) Flexible Steel Knives, Cast-Iron Extension Tables, Closed Stand w/ Built-In Casters, Digital Readout, 4" Dust Port

The DELTA 22-451 DC-580 20-inch Planer comes with a powerful 1-phase 5 HP 220-volt 1-phase motor with magnetic motor starter and automatic reset overload protection, a 3-knife cutterhead, a sectional serrated infeed roll, double bed rollers, a polyurethane outfeed roll, sectional chip-breakers, a dust chute, a knife-setting gauge, and a wrench. This planer's up-front controls include a handy lever for instantly engaging and disengaging feed rolls and push-button on/off switch. Other features include a large, precision-ground table with two adjustable bed rolls for smooth feeding of uneven stock, and a large-diameter, micro-adjustable bed roll lever easily raises and lowers bed rollers for quick setups. An included sectional serrated steel infeed roller with sectional chip breakers also assists in planing uneven stock. Conveniently placed to the right, a large hand wheel with locking knob adjusts table height and a sectional serrated steel infeed roller with sectional chip breakers planes uneven stock. This planer is capable of a maximum stock width of 20 inches, a maximum stock thickness of 8-5/8 inches, a minimum stock thickness of 11/64 inches, a maximum depth of cut of 1/8 inches, a planing width of 20 inches, and a minimum length of stock of nine inches. This planer's cutter head operates at 5,000 RPM and provides a feed rate of 20-to-30 FPM and has as a table size of 22 x 28 inches. Weighing 840 pounds, this planer measures 32 x 44.5 x 49 inches.

The DELTA 22-470 24-inch planer offers heavy-duty performance with enough power to handle uneven, large stock with ease. The industrial 7-1/2 HP, three-phase motor powers each of the three cutterheads at speeds of up to 5,000 RPM for smooth, easy cuts. Feed stock fast with the adjustable double bed rolls, and sectional serrated steel infeed roller with chip-breakers, that handle the 22-470's ultra-fast, variable feed rate between 20 and 30 feet per minute. The 22-470 handles stock as wide as 24 inches and up to 8-5/8 inches thick, and dust is controlled via the integrated dust chute.

Features like the segmented chip breaker, variable feed speed and lever adjustable bed rollers are expensive options on most planers of this size. Not with Grizzly! For maximum power and performance in a 20" planer, our heavy-duty industrial planer is hard to beat. Adjustable bed rollers and 5" dust port are standard on this already-deluxe machine. From the precision ground cast-iron bed to the hefty handwheels and conveniently located, thermally protected magnetic switch, you know you're dealing with a class act when you get your hands on a planer like this. Truly an industrial machine. Specifications: ? Cutterhead motor: 5 H.P., 220V, single phase ? Feed motor: 2 H.P., 220V, single phase ? Overall size: 42-1/4"H x 38" W x 40-1/2"D ? Maximum cutting width: 20" ? Maximum cutting height: 8" ? Maximum depth of cut: 1/8" ? Minimum stock thickness: 1/4" ? Minimum stock length: 8" ? Bed size: 21-1/4" x 28-1/4" ? Cutterhead RPM.: 5200 ? Number of Endexable Inserts: 96 ? Rate of feed per minute: 17-26 F.P.M. ? Number of cuts per inch: 66-101 ? Number of cuts per minute: 20,800 ? Power transfer: double V-belt ? Shipping weight approx. 1052 lbs. Features: ? Heavy-duty cast iron construction throughout ? Table is precision-ground cast iron ? Powerful 5 H.P., capacitor start TEFC cutterhead motor comes with magnetic and thermally protected switch ? Bed rollers are lever adjustable ? 5" dust exha

Features like the segmented chip breaker, variable feed speed and lever adjustable bed rollers are expensive options on most planers of this size. Not with Grizzly! For maximum power and performance in a 20" planer, our heavy-duty industrial planer is hard to beat. Adjustable bed rollers and 5" dust port are standard on this already-deluxe machine. From the precision ground cast-iron bed to the hefty handwheels and conveniently located, thermally protected magnetic switch, you know you're dealing with a class act when you get your hands on a planer like this. Truly an industrial machine. Specifications: Cutterhead motor: 5 H.P., 220V, single phase Feed motor: 2 H.P., 220V, single phase Overall size: 42-1/4"H x 38" W x 40-1/2"D Maximum cutting width: 20" Maximum cutting height: 8" Maximum depth of cut: 1/8" Minimum stock thickness: 1/4" Minimum stock length: 8" Bed size: 21-1/4" x 28-1/4" Cutterhead R.P.M.: 5200 Rate of feed per minute: 17-26 F.P.M. Number of cuts per inch: 66-101 Number of cuts per minute: 20,800 Power transfer: double V-belt Shipping weight approx. 1010 lbs. Features: Heavy-duty cast iron construction throughout Table is precision-ground cast iron Powerful 5 H.P., capacitor start TEFC cutterhead motor comes with magnetic and thermally protected switch Bed rollers are lever adjustable 5" dust exhaust hood and board return rollers are standard 4 Knife cutterhead Varia