Discount Tools - Save on Tools

Whatever intricate detailing your work demands, the DeWalt DW788 20-Inch Scroll Saw is up to the task. Featuring a 1.3 Amp motor that delivers variable speed performance from 400 to 1,750 RPM, this saw makes use of a unique double parallel-link arm design that reduces vibration and noise significantly, helping you achieve phenomenal accuracy. This design allows the arm to pivot smoothly and easily from the back of the saw to the front, it keeps the blade perpendicular to you work surface to help you avoid over or under cutting, and it allows the arm to lift for inside cuts. The saw's on-off switch, electronic speed control, and blade-tensioning lever are position on the upper part of the arm for easy access, along with a flexible dust blower that helps keep your work surface clear. DeWalt's exclusive blade clamps makes blade changes tool-free for quick and easy switches, while an oversized table provides material support and bevels 45-degrees left or right for added versatility. This table is made of cast iron for exceptional durability. This DeWalt high-performance industrial tool comes with blades and a hex wrench, and it is backed by a 3-year limited warranty.

This is the ideal machine for that delicate project: model building, toy manufacturing and precision work. It cuts soft wood (e.g. bass wood) up to 1 3/16" (30 mm), hard wood up to approx. 25/64" (10 mm), plastic (including circuit boards) up to approx. 5/32" (4 mm) and non-ferrous metals up to 5/64" (2 mm) with standard scroll saw blades. The machine has a very stable ribbed die-cast aluminum saw frame with 11 13/16" (300 mm) throat. The blade guide is equipped with an integrated blower. The patented head-part is height-adjustable in 3 positions and offers numerous advantages: The lifetime of the saw blade is tripled after shortening it twice (teeth in the middle part of the saw blade are finally used, too). With the head in the lowest position, working with a blade shortened to 2 23/64" is even more precise. The machined worktable of die-cast aluminum has a size of 6 19/64" x 6 19/64" (160 x 160 mm) and is equipped with an adjustable longitudinal stop and graduated miter gauge (0-90°). The ABS plastic body provides a very practical sliding door on the right side of the housing for the removal of saw dust. The saw is powered by a 110 - 120V motor (85 W) for prolonged use, low noise performance and even supported by a quiet and wear-resistant toothed belt drive, running in a ball bearing assembly. The machine offers an electronically controllable stroke rate from approx. 150 - 2,500 strokes/min.

Clean, accurate cuts without the need for finishing. This is the perfect machine for tool and die making, model building, toy repairs, puzzle sawing, architectural work, antique restoration, etc. It operates problem-free, even when cutting acrylics, fiberglass, polystyrene foams, rubber, leather and cork.The unit offers a super cutting capacity (wood 1 1/2", plastics 1 3/16", non-ferrous metals 25/64") and yet runs with only a hum. The air blower with adjustable nozzle provides clear visibility of work piece and cutting line. The unit's machine base of cast iron offers the needed stability for vibration-free operation. The sturdy aluminum die-cast table tilts up to 45°, allowing a lot of special effects like incised lettering, sawing chamfers, inlays and marquetry. The twin cast iron saw over arm with ball bearing direct drive is equipped with a practical handle for quick and easy adjustment of the blade tension. Standard commercially available pin blades can be rapidly fitted and stored in the special compartment on the side of the machine. As well the clamping jaws also allow the use of plain end blades, which are as well easily tightened with the included T-Allen key. The machine comes complete with 5 each coarse and fine saw blades. 1. Ideal especially for all internal cuts (impossible with band saws and circular saws). The DSH is fitted with a vacuum cleaner or dust extractor adapter. To keep your work area dust-free! Technical data: Speeds 990 and 1,500 strokes/min Stroke length 3/4" Table Size 14 1/4" x 7 3/32" (tilts up to 45° for miter cuts) Throat Depth 15 3/4" (400 mm) Cut Depth 1 1/2" (1" at 45° table tilt) Overall measurements Length (20 55/64"), Width (11 1/32"), Height 11 13/16" Volts 110-120V AC, 60 Hz Weight 44 lb. Note: Please consider also our smaller scroll saw DS 115/E Proxxon tools come with a 2 year factory warranty.

Sturdy, cast iron construction. Maximum cutting height of 2" with a 51/64" blade stroke. 45 degree table tilt. Shipping weight of 31 lbs.

This is The tool for making cutouts for switches, outlets in drywall, and paneling. Why? Because the Speed Saw's cutting depth does not project past the backside of the surface, minimizing the likelihood of cutting wires, pipes and studs. Factor in cordless convenience, and here's an unbeatable tool for your remodeling and light construction projects.Adjustable depth setting for cutting in many types of material. Accepts 1/8'' and 1/4'' bits for a variety of cutting applications. Spindle lock for easy one-wrench bit changes. Ergonomically designed to improve user comfort Unit is Reconditionedwith 1 Year Warranty Requires Battery # 130224028 Which is the One Plus System

Max. Cutting Depth: 2(in) - Max. Cutting Width: 16(in) - Table Size: 14 3/8(in) x 7 7/8(in) - Table Adjustment: 0(deg)- 45(deg) - Blade Length: 5(in) - Stroke Length 7/8(in) - Pin-type blade - C UL Listed - Dimension (in): 16.0 L x 14.5 W x 13.0 H

Sold as each. 16". 1.6 Amp ball bearing motor. Variable speeds 400 - 1800 CFM. Parallel rocker arm system absorbs stress. Large cast iron "pear shape" work table 9-1/2" x 16-7/8" tilts to 45 deg. for bevel cutting. Sawdust blower system keeps work area clear. "Speed-Lok" blade change system designed for use with pinned or blank end 5" blades. Includes built-in storage case for extra blades. 5 year warranty on machine, 2 years on motor. Boxed. Manufacturer's number: 8366SL. Country of origin: China. Distributed by Power Tool Specialists.

Other features include: built in air nozzle to clear sawdust; easy to adjust blade tension knob; safety switch with key; clear plastic blade guard moves easily out of the way; no tools necessary for blade changes; approximate shipping weight is 52 lbs.

When you used your first scroll saw back in wood shop class, you never dreamed you would ever own such a capable and enjoyable tool as your Hegner. Now, whenever the creative urge strikes, your HEGNER is ready! the HEGNER 22" Variable Speed saw, featuring a large 22" capacity to handle virtually any project size, the unique Quicklock tension release system to make fretwork and inside cuts extremely easy, the 400-1700 RPM variable speed motor, dual-tilt slotted table, plus all the other features that make HEGNER a breed apart from all other scroll saws. This saw was chosen by Better Homes and Gardens WOOD magazine for their original "Idea Shop".

The HEGNER 18" Variable Speed saw is compact, quiet, precise and versatile, lets you cut almost any material and make a wide variety of projects. HEGNER scroll saws are known for easy blade installation, long blade life, superb cutting control, smooth and quiet operation, accurate sawing, smooth edges without sanding, and unsurpassed reliability. The 18-V is Hegner's most popular model.