Makitas AN922 pneumatic framing nailer is a lightweight (only 8.4 lbs.) yet sturdy framing nailer, firing 2in. to 3 1/2in., 22deg plastic or wire collated round- head nails. The easy-load, rugged aluminum magazine is as simple as inserting the nails and pulling back on the pusher rod. A built-in ceramic air filter system prevents debris from entering the tool, extending tool life and reducing down time. The 9 quick-dial depth adjustment settings give you precise control of nail depth. Nose piece with sure-grip spikes prevents slipping. Operating PSI: 65 - 120, Fastners Used: Framing Nails, Fastner Sizes (in.): 2 - 3 1/2, Adjustable Depth Contol: Yes, Coil or Strip: Strip, Inlet Size (in.): 1/4, Min. Hose Size (in.): 3/8, Case Included: No, Tool Length (in.): 8.4, Tool Weight (lbs.): 21 1/2

The built-in magnet on this pneumatic nail driver ensures proper loading and alignment so you can drive nails from 3in. to 4 7/8in. with complete confidence. The quick-dial adjustment has six settings for precise control of nail depth. The built-in air filter prevents dust and debris from entering the tool. 360deg exhaust system directs exhaust away from operator. Tool hook can be installed on either side of the driver. Operating PSI: 65 - 120, Fastners Used: Bulk Nails, Fastner Sizes (in.): 2 15/16 - 4 7/8, Adjustable Depth Contol: Yes, Coil or Strip: Single Load, Min. Hose Size (in.): 3/8, Case Included: No, Tool Length (in.): 2.9, Tool Weight (lbs.): 10 1/4

Replaces worn or broken trigger valve for Stanley Bostitch Nos.N52FN, N62FN, N79RH, N79WW, N80SB, N88WW, N88PC, N90PT, N95RHN nailers. Kit includes: TVA11, Roll Pin., and Lubricant.

T200-F18, 2", Air Powered, 18 Gauge, Brad Nailer, Drives 18 Gauge Brad Nails From 5/8" To 2", Includes Case, This Brad Nailer Is Extremely Lightweight & Well Balanced Which Reduces Operator Fatigue, 1 Year Warranty.

Hammerhead 2 Pneumatic Floor Nailer, Version, Designed For Nailing 1/2"-33/32" Tongue & Groove Wood Flooring, Can Be Easily Converted To A Face Nailer By Simply Changing The Show, Mallet Activated To Ensure The Tightest Floor Possible, Air Chamber Provides For Rapid Cycling With 90-100 PSI, Holds Up To 200 2" Porta-Nails, Both Angle & Face Nails, 2 Year Limited Warranty.

The 18-gauge brad nailer from WEN fires 18-gauge brads 3/4 to 2 inches in length. It features an adjustable exhaust deflector, a rubber-wrapped handle, a quick-release for jam-clearing, an aluminum body, and a magazine window that shows the remaining brad count. The magazine holds 100 brads, and the tool operates at 60-100 psi with a 1/4-inch NPT air inlet fitting. This kit includes oil, adjusting wrenches, and a custom carrying case.

The DeWalt D51430 Heavy-Duty 1-inch-to-2-inch 16-gauge 7/16-inch Medium Crown Stapler features a lightweight design with enhanced maneuverability for minimized user fatigue. With a cycle rate of 20 fasteners per second (at 100 psi), this stapler provides a speed rating that works as fast as you do. A low air consumption rating consumes less air per shot, allowing the tool to cycle faster and more consistently, and a clean nose area aids in a more exact fastener placement. A tool-free jam clear feature eliminates down time from bent fasteners caught in the nose piece, and a tool-free depth adjustment assists in locating an ideal depth setting. Other features include a tool-free 360-degree exhaust that channels air and dust away from the user and a trigger lock-off that allows the trigger to be disabled when not in use. Backed by a manufacturer's 3-year warranty, this stapler comes with a pair of DeWalt safety glasses, two Allen wrenches, and a replacement sequential trigger.

The old stand by tool just improved. Hitachi's new side load bucket is mounted on the same housing and feed system that makes the model No. NV45AB one of the most durable tools in the marker. This new roofing tool provides quick fastener changes without t

Includes 1Y0053N Finish & Trim 3-Tool Combo Kit - 1Y0053N, FinishPro® 35, 2-1/2" 15-Gauge Finish Nailer (ProSeries) - 1Y0001N, FinishPro® 15MG, 1-3/8" 18-Gauge Brad Nailer (ProSeries) - 1T0021N, SLS15MG, 1" 18-Gauge Medium Wire Stapler (ProSeries) - 1V0021N, Tool Bag

This is a factory reconditioned power tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new condition. Some tools may contain cosmetic blemishes. Includes 15-Gauge Angled Finish Nailer - FNA250-15-RT, Carrying Case