This is a reconditioned power tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new condition. Some tools may contain cosmetic blemishes. The Bostitch BT200K-2 is a Factory Reconditioned 18 Gauge 5/8 to 2 Oil-Free Brad Nailer Kit. This lightweight tool has magnesium housing for jobsite durability. The oil-free operation prevents stains on work piece. It has ultra-quiet rear exhaust and open nose design for easy jam clearing. Includes: Brad nailer and carrying case

This is a reconditioned power tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new condition. Some tools may contain cosmetic blemishes. Ready to use straight out of the box, Bostitch MFN200 Factory Reconditioned 2 Cleat Manual Flooring Cleat Nailer, comes along with a rubber mallet. Simply unpack, load, and strike to nail down and construct stable flooring. Ideal for DIY as well as professional installer this power cleat nailer drives 1 ½ to 2 inches nail with minimal effort. Gun it on hardwood or engineered floors and set the tongue-and-groove joint right for once and for all. The long reach handle of this cleat nailer enhances the comfort of use besides adding to the control. You need not bend every time to strike this nailer. The sturdy aluminum construction makes Bostitch MFN200 endure jobsite abuse. Use it for yourself or let your friends borrow; rest assured this tool will be with you for years. Being a non-pneumatic tool it assures a jam-free operation and lets you smoothly nail an L shaped serrated nail at every strike. More over the rubber bumper prevents the flooring from any sort of damage leaving it neat and spotless. With a magazine capacity of 200 cleats you are freed from the effort of frequent reloading. The 9.5 lbs Cleat Nailer is lightweight, can be easily ported at jobsite and stably drives a nail through ¾ inch hardwood flooring. Includes: MFN200 Cleat Nailer and Rubber Mallet.

Lightweight, air-operated staple gun is easy to use on a number of projects. Accepts a variety of staple sizes for different applications. Operating PSI: 60 - 100, Fasteners Used: No.4 Staples, Fastener Sizes (in.): 1/4, 5/16, 3/8, 1/2 and 9/16, Fastener Capacity Per Strip: 100, Coil or Strip: Strip, Inlet Size (in.): 1/4, Min. Hose Size (in.): 3/8, Case Included: Yes, Tool Length (in.): 2.9, Tool Weight (lbs.): 8 29/32

Long nails into hardwood? No problem. Working overhead? It's only 4.2 pounds. Hate having the exhaust in your face? Tool-free, 360-degree adjustment takes care of that. No time for jams? Clearing takes no more than a couple of seconds because of the quick-release nose. The magazine is made of nylon, but it seems as rugged to us as any metal magazine out there. That's also why this nailer is so easy on the hands. Add to that a nicely padded grip and a selective trigger and you'd think you have the perfect nailer. But get this—there's a built-in dust blower that clears light debris and dust from your workpiece. Hitachi quality leaves nothing to want.--Kris Jensen-Van Heste

Ramsond has quickly become a recognized name for the quality and durability of its products. The Ramsond RMM4 2-IN-1 flooring stapler & cleat nailer combination is another testament to the recognition that Ramsond tools now enjoy. With over 30,000 units sold in North America, the RAMSOND (R) RMM4, patented combination 2-in-1 hardwood cleat nailer and stapler is an engineering marvel. It shoots both cleat nails and staples. It shoots 15.5 and 16 gauge staples ranging from 1 to 2 inches, and "L" cleat ranging from 1-1/2" to 2". The 2-in-1 magazine has a capacity of 100 staples/cleats. It is highly durable and contractor/industrial quality, yet light weight and agile. The body of this gun is constructed of durable die-cast alloy for job site durability and low weight. It comes with an extra-wide composite non-marring base plate for added stability and protection against scratches to the flooring surface. It provides a conveniently long reach handle with an ultra-padded cushioned grip for balance and optimal operating comfort, stability and safety. Internally, the driver blade is constructed of a very tough heat treated and hardened steel. The composite base plate designed to allow the user to drive fasteners much faster and closer to the wall while protecting the flooring surface from marring. This ergonomically designed multifunctional tool is manufactured under the strict ISO guidelines for quality control. With nearly 30,000 sold, this product has become a symbol for reliability and durability.

Can be used on 1/2", 5/8", 3/4" and 25/32" floor thickness Magazine Capacity: 100 PCS Operation Pressure: 60-100 PSI Air Inlet: 1/4" NPT Purchase Includes: Flooring Cleat Nailer Gun. Professional Grade Carrying Case. High Quality Mallet. Regulation Eye Goggles. Air Tool oil. Extra Non-Marring Base Plate Cover. Hex Wrenches. Detailed Operating Instructions.

This is a reconditioned power tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new condition. Some tools may contain cosmetic blemishes. The Bostitch MIIIFS is a Factory Reconditioned 3/8" Flooring Stapler Kit. The compact, mallet-actuated air stapler automatically positions and drives staples for rapid installation of hardwood flooring. It secures the flooring at the proper angle and penetration without the danger of hammer marring. By simply resting the nose of the machine squarely against the work, the direction and angle of the staple is automatically aligned. The stapler is easily adjusted to handle different flooring thickness or tongue positions. It has an aluminum body for job site durability.

The Porter-Cable US58 1/4-Inch to 5/8-Inch, 22-Gauge C-Crown Upholstery Stapler is an easy to use pneumatic stapler with plenty of useful features. It uses standard Senco C Type 22-gauge, 3/8-inch crown staples to get the job done right, and it includes a 1-inch nose extension for those tough to reach areas. The high-capacity bottom-load magazine handles 185 staples, and the driver guide moves back to easily clear jams from the magazine. The US58 stapler requires 70-120 PSI air pressure, so it will work with most air compressors.