Swing over bed 12-3/5" Swing over carriage 7-7/8" Distance between centers 750mm 30" Lathe Chuck Diameter 6-7/10" 3 Jaw Self Centering chuck Spindle taper MT5# Spindle through bore 1-1/2" Spindle Speeds 12(60-1600 RPM) Metric threads 15 (0.5-4mm) Inch threads 23 (5-48 1/n") Longitudinal feed rates 0.1-1.50mm/r 0.004-0.059 in.per revolution Cross feed rates 0.022-0.3mm/r 0.0008-0.0118 in.per revolution Tailstock barrel Taper MT3# Tailstock barrel travel 80mm 3-1/7" 1-1/2hp,110 or 220 Volt setup ships with standard accessories and full 1 year manufacturers warranty!

Includes 13" x 40" 2 HP 1-Phase Belt Drive Bench Lathe - 321360A, 6" 3-Jaw Direct Mount Chuck w/ Top Reversing Jaws, 8" 4-Jaw Chuck, 12" Face Plate, Four-Way Tool Post, Steady & Follow Rest, Metric Change Gear, Centers w/ Headstock Center Sleeve, Threading Dial, Tool Box & Tools

Construction - Headstock, tailstock, foot, tool rest base, and tool rests are of heavy cast iron. Bed is made of heavy steel tubing. Headstock - The drive spindle is a No. 1 Morse taper, threaded 3/4" 16. The out bork end of the drive spindle can also be used for large turning and is threaded 3/4", 16, left hand. Tailstock - Slides along full length of the bed and clamps into position at any distance from the drive spindle. The ram has a hand wheel advance of 2 3/8" with positive lock and is fitted with a No. 1 Morse taper.

10"x 15 3/4" Lathe, 1" Spindle Bore,dial Caliberation, 5" Compound Travel 14" Cross Travel , 3/4 Hp, 110 or 220 Volt Setup Complete with Standard Accessories & Full 1 Year Warrantty

10" swing over bed 15 3/4" distance between centers 8-56 TPI 0.2-3.5mm Lathe spindle taper MT#4 Tailstock taper MT#3 1" spindle Bore 9 spindle speeds Tailstock Taper MT#3 Tailstock quill Travel 2" Cross Travel 14" Compound Travel 5" 3/4HP , 110 or 220 volt set up

Lathe Specifications: Swing over bed 320mm 12-3/5" Swing over carriage 200mm 7-7/8" Distance between centers 600mm 23-3/5" Lathe Chuck Diameter 170mm 6-7/10" Lathe Chuck Type 3 Jaw Self Centering Spindle taper MT#5 Spindle through bore 38mm 1-1/2" Spindle Speeds 12(60-1600 RPM) Metric threads 15 (0.5-4mm) Inch threads 23 (5-48 1/n") Longitudinal feed rates 0.1-1.50mm/r 0.004-0.059 in.per revolution Cross feed rates 0.022-0.3mm/r 0.0008-0.0118 in.per revolution Tailstock barrel Taper MT#3 Tailstock barrel travel 80mm 3-1/7" Electrical Specifications: Horsepower 750 1hp Motor Type A/C Phase Single or three phase Voltage 110V or 220V

Spindle Bore: 1-1/2" Spindle Speeds:12 (60-1600 RPM/50Hz) or (75-1900RPM/60Hz) Swing over work table: 6-7/10" Thread pitch on processing: 9-48 1/n" Thread kinds on processing: 23. Tailstock Taper: MT3# X-Axis Working Travel:23-3/5" Y-Axis Working Travel: 6" Mill/Drill Specifications: Head Rotation: 360 degree ;Head Travel:7". Spindle Center to Support Column:12-1/8". Spindle to Table Distance(Min-Max):4-3/4-11-4/5". Spindle Speeds: 4(220-2620RPM/50Hz)or(240-2700RPM/60Hz) Spindle Taper: MT3# or R8 X-Axis Working Travel: 23-3/5";Y-Axis Working Travel: 6" Electrical Specifications: Horsepower: 1-1/2hp lathe 3/4 mill Motor Type A/C. Phase: Single or Three phase. Voltage:110 or 220 Volts.

Dovetailed machine slides with adjustable gibs for long-lasting accuracy, ground steel bed and cast base for rigidity, instrument quality finishes, laser engraved aluminum adjustable zero handwheels, precision rolled leadscrews, inch or metric calibrations available, powerful DC motor with electronic speed control, 70-2800 RPM range, two 20mm headstock bearings with adjustable preload, extra pulley position for high torque, rotating headstock for taper turning. Spindle has #1 Morse internal taper, ¾-16 external thread, .405 through hole. Includes faceplate, drive dog, tool post, ¼ right-hand HSS cutting tool, two dead centers, two chuck arbors and drawbolt, 4 hex adjustment keys and 2 spindle bars, 48-page color instruction manual. Turn wood, plastic, brass, aluminum or steel (Stainless and Titanium with optional carbide tools) to tolerances of less than 1/1000. Made in USA. A Package includes 3.1 3-jaw chuck and 3/8 Jacobs tailstock drill chuck. Save money compared to adding chucks separately.