Item #: 825-354165.

• Spindle Thread = MT-2/JT-33
• Spindle Travel = 3 1/8 in
• Drilling Cap. = 5/8 in
• No. of Speeds = 16
• Spindle Chuck Size = 5/8 in
• Speed = 200 rpm [Min], 3630 rpm [Max]
• Phase = Single
• Power Cap. = 3/4 hp
• Control Voltage = 115.00 V
• Height = 39 1/2 in
• Bit/Blade Mounting Swing = 15 in
• Width = 13 in
• Cord Table/Plate Length = 16 in
• Table/Plate Width = 13 in
• Column Diameter = 2 7/8 in
• Column Neck Base Length = 20 3/8 in
• Base Width = 11 in
• Base Depth = 31 in
• Wt. = 150 lb

Customers also search for: Discount Jdp-15m 15" Drill Press, Buy Jdp-15m 15" Drill Press, Wholesale Jdp-15m 15" Drill Press, 662755503054, 354165, Corded Drill Presses

With a large motor, the Palmgren 1/2 HP 15-Inch 12-Speed Bench Drill Press provides accurate drilling in tough materials like cast iron and steel. Precision-machined and designed with rigid stable construction, the work table can be tilted 45 degrees both left and right, and rotates 360 degrees on a vertical axis. Other features include an enclosed ball bearing quill assembly with long spindle travel, a locking power switch to prevent unauthorized use, and a hardened steel rack and pinion with locking mechanism for easy table height adjustment.

What's in the Box
1/2 HP 15-inch 12-speed bench drill press, chuck with safety-eject key, chuck, arbor, and power cord.

For remote drilling in metal, the 4270-21 is a great choice. It can drill up to 1 1/2in. diameter holes through 2in. thick steel with annular cutters, or 1/2in. diameter holes 4 1/4in. deep with twist drill bits. The tool is set up to accept standard 3/4in. Weldon shank cutters (not included). U.S.A. HP: 1.1, Chuck Size (in.): 3/4

If your production needs have outpaced a manual jig, look to the Kreg Foreman Pocket Machine to handle the job. This compact, semi-automatic machine creates the same round-sided hole as the manual Kreg Jig in a fraction of the time. To operate, simply position your material to be drilled and pull the lever forward. This motion activates the 3/4 HP drill motor and engages the clamping cylinder. Finish the drill stroke by continuing to pull on the lever and then return the lever to the home position. Hinge-top design allows easy access to the drill bit, drill guide and motor. Fence has two floating stops. 6-3/4" tabletop height. Includes bit.

Press pen segments together with controlled lever action. A sliding rod adjusts for progressively longer segments. Includes long lever handle and two alignment pins. Indispensable for any pen maker!

Powerful 1HP Induction Motor, 16 Spindle Speeds (200-3,630), Rack and Pinion Table Height, Solid Steel and Cast Iron Construction, Clutch Depth Stop, 2 Year Warranty

The unit offers a high quality machined work table of ribbed die-cast aluminum (worktable size 8 21/32" x 4 23/32" (220 x 120 mm) providing an adjustable fence with scale. The solid, hard-chromed steel column is 11" high (280 mm) and has a diameter of 3/4" (20 mm). The 110-120V/85W motor, which runs very quiet and has a long life expectancy is built in to the super stable die-cast head of the machine. The power transmission by 3-step aluminum pulleys and flat belt provides 3 spindle speeds of 1,800, 4,700 and 8,500 rpm allowing triple torque at low speeds. The chrome feed lever has an adjustable depth scale. The spindle is essentially free of play as a result of the 3 high quality ball bearing assemblies. For the insertion of MICROMOT steel collets it is recessed, but also threaded for attaching drill chucks with 3/8" thread (for this option see below the Roehm drill chuck, which we offer as an accessory). The spindle has an extremely high rotational accuracy and a 1 3/16" (30 mm) feed. The quill diameter is 1 1/4" (32 mm) with return spring, the throat depth (column to drill spindle) 5 1/2" (140 mm). The unit provides quick coarse height adjustment of headstock via clamp lever. The max. height (worktable surface to spindle end) is 5 1/2" (140 mm). The unit comes with six triple slit MICROMOT precision steel collets for shaft sizes ranging from 1/32", 1/16", 5/64", 3/32", 7/64" and 1/8" (1.0, 1.5, 2.0, 2.4, 3.0, 3.2 mm).

Keep hollow mortising chisel edges sharp for fast and efficient cutting!


Diamond-coated abrasives hone the hardest steel, including carbide.
Cone shape puts the final edge on inside bevels.
Sharpens mortising chisels up to 1/2" size.
Comes with handle, 1/4" quick-change chuck, coarse and fine grit cones.


Cone shape puts the final edge on inside bevels. Sharpens mortising chisels up to 1/2" size.


Set includes: Ergonomic handle for comfortable, slip-resistant gripping power. 1/4" quick-change chuck, coarse 220 grit cone for removing nicks and burrs, fine 600 grit cone for final honed cutting edge.

Arbor Presses Machine Type: Mechanical Pressure: 1

Please view photos for more details on the item. Thank you