Its a rare human who actually enjoys clipping a dogs nails; and rarer still, the dog who enjoys it. Enter Dremels cordless groomer, a quiet, battery-powered rotary tool that gently grinds down your pets nails without cutting. We happen to know a particular hound named Sophie whos endured more than her share of cracked nails and bleeding nail beds, the result of the standard guillotine-type nail trimmers. Though she was a bit wary of the Dremel, she sniffed at it and decided it was harmless. Then we set it on the floor and turned it on. Sophie seemed concerned for a minute, but then lost interest. We let her get used to the sound of the Dremel for a few minutes, then got down to business. We expected her to cringe and pull away when we took paw in hand, for what usually follows is not pleasant for her. She submitted reluctantly at first to the Dremel, probably expecting the worst, but once we distracted her with a piece of rawhide, she forgot about the nail hubbub and let us carry on. The whole thing was quick and painless, which made a change for Sophie, and was actually kind of soothing for the humans, which definitely made a change for us. We followed the advice in the manual and alternated between two paws at a time, not keeping the abrasive on any nail for more than a couple of seconds, and we made sure each nail was cool before grinding it a second time. If we had a criticism, it would be to wish only that Dremel would include the -inch drum for larger dogs like Sophie as well as the smaller one. Other than that, its a tail-wagger.

Ideal for identifying and personalizing your valuables as well as decorative engraving, Engraves wood, leather, tools, machinery, hard steel, stone, glass, ceramics, porcelain, plastics, and more, 115V, AC, 60 Hz, 0.2 amps, 7,200 strokes per minute, Includes replacement carbide steel engraver point

Sand, grind, and cut anything around the house. Features a powerful, high torque motor, exclusive Flip-Lock^TM spindle lock system, rubber overmolded grips for superior comfort and control, universal collet system, and three speeds for maximum precision in all applications.""

The Black & Decker 3-speed rotary tool is created with a high-torque 2 amp motor so it finishes jobs quickly and efficiently -- without bogging down under the load. Versatile, rugged, and loaded with convenience features, this hardy rotary tool will make short work of all your fine detail jobs, craft projects, workshop and household tasks.

The RTX-6 boasts an exclusive Flip-Lock spindle lock system for quick and easy accessory changes, eliminating the need to hold down an awkward button as you try to switch heads. And you'll have a lot of heads to choose from -- because the universal collet system accepts all standard rotary tool accessories. So don't worry about buying special bits, tips, or attachments. This tool accepts any rotary tool add-on you can think of, so the number of potential applications is almost limitless.

This outstanding tool offers three speed settings for maximum precision and versatility, no matter the project. With speeds -- 12,000/24,000/30,000 rpm -- you can customize the power to the project at hand; and the separate 3-speed dial means you can set it and forget about it. Also, the rubber overmolded grip keeps your hands comfortable and your accuracy high, because a tool that's easy to hold is easy to maneuver. This kit includes 27 accessories, 2 clamps, and a soft bag to keep it all together and organized. -- Cherie Priest

Applications:
The RTX-6 is ideal for an immense variety of jobs. It cuts, sands, grinds and carves; it cleans, polishes, engraves, sharpens and drills. This rotary tool smoothes and shapes work pieces, removes rust and corrosion from old metal, and even creates drywall cut-outs. Use it around the home, in the workshop, or anywhere else.

What's in the box:
Black & Decker rotary tool, 27 accessories plus the 2 clamps, soft-sided bag with accessory compartment, user guide, and wrench.

Rotary Tool Kit W/10 Accessories - ROTARY TOOL KIT W/10 ACCESSORIES. Variable speed from 5,000 to 35,000 RPM. 300 series tool kit. Lightweight design

The Proxxon Professional Grinder is the smoothest and most powerful hand held rotary tool we have ever tested. The quality of this tool is exceptional. This tool has features not found on other rotary tools

Includes RotoZip Pro Cutoff Kit w/ Worklight - RZ20-2100-RT, ZipMate ZM3 Cutting Attachment, Masonry Cut-Off Wheel, Metal Cut-Off Wheel, Dry Diamond Cut-Off Wheel, Circle Cutting Guide Attachment, Bit Accessory Pack, Soft Carry Bag

1001 uses for every conceivable operation: milling, drilling, grinding, polishing, brushing, cleaning, deburring, sawing, carving, engraving, rust removal, etc. The maximum speed of 20,000 rpm is continuously variable down to 5,000 rpm. The full-wave electronic speed control results in virtually constant torque, even at lower speeds, which in turn allows for micro drilling. The spindle operates in a precision ball bearing assembly and is fitted with a lock button. The 3/4'' (20 mm) collar fits MICROMOT drill stands and vices. The FBS 115/E is powered by a quiet, high quality, specially balanced permanent magnet motor. The housing is of fibreglass-reinforced POLYAMIDE. The improved ergonomic design with the soft grip two component material allows for optimal control while working. Comes complete with 43 bits and cutters, in a durable plastic case. Technical data: Speed: Variable(5,000 to 20,000 rpm); Keyless Chuck 1/64'' - 1/8'' (0,3 - 3,2 mm); Max Power 1/8 hp (100 W); Volts 110 - 120V AC, 60 Hz; Length 8 1/2'' with chuck (220 mm); Weight 1.2 lb (540 g)

This tool takes the work out of your carving projects and can be used by all carvers, regardless of age or experience. Perfect for carving all wood types. The rapid cutting action of the SGM (12,000 cuts per minute) allows the ability to do fine work like adding details as well as roughing out. Cleanly carving with no dust and virtually no effort is ensured. The tool is exceptionally quiet, yet very powerful due to the permanent magnet motor. It is ideal for small to medium carving projects, working on furniture, reconditioning antiques, lino cutting, delicate paint removal and working on plaster of Paris. The ergonomic design and the light weight (only 1.5 lb) allow to control it very easily with one hand, only. The tool is very safe, as the reciprocating action does not start until the gouge is pressed to the wood. The unit has a fibreglass reinforced POLYAMIDE casing and features a multiple ball bearing construction in a die-cast aluminum gear housing. It comes with 3 razor sharp bi-metallic knives (each one U, V and flat shape) in a durable plastic case. The SGM also accepts a variety of Flexcut reciprocating chisels. Technical data:Cuts/min 12,000, Max Power 1/10 hp (60 W); Volts 110 - 120V AC, 60 Hz; Length 9 3/8'' (240 mm) w/o knife; Weight 1.6 lb (740 g) w/o knife;