The unit offers a high quality machined work table of ribbed die-cast aluminum (worktable size 8 21/32" x 4 23/32" (220 x 120 mm) providing an adjustable fence with scale. The solid, hard-chromed steel column is 11" high (280 mm) and has a diameter of 3/4" (20 mm). The 110-120V/85W motor, which runs very quiet and has a long life expectancy is built in to the super stable die-cast head of the machine. The power transmission by 3-step aluminum pulleys and flat belt provides 3 spindle speeds of 1,800, 4,700 and 8,500 rpm allowing triple torque at low speeds. The chrome feed lever has an adjustable depth scale. The spindle is essentially free of play as a result of the 3 high quality ball bearing assemblies. For the insertion of MICROMOT steel collets it is recessed, but also threaded for attaching drill chucks with 3/8" thread (for this option see below the Roehm drill chuck, which we offer as an accessory). The spindle has an extremely high rotational accuracy and a 1 3/16" (30 mm) feed. The quill diameter is 1 1/4" (32 mm) with return spring, the throat depth (column to drill spindle) 5 1/2" (140 mm). The unit provides quick coarse height adjustment of headstock via clamp lever. The max. height (worktable surface to spindle end) is 5 1/2" (140 mm). The unit comes with six triple slit MICROMOT precision steel collets for shaft sizes ranging from 1/32", 1/16", 5/64", 3/32", 7/64" and 1/8" (1.0, 1.5, 2.0, 2.4, 3.0, 3.2 mm).

Perfect for the small shop, this tough little guy won't get in your way when things get cramped. Put it away on the shelf when finished. Very cute unit!

1 1/4in. to 5in. O.D. capacity. Easy to use. U.S.A.

How many times have you wished for a simple horizontal boring machine to drill accurate holes into the edges of flat lumber for doweling, hardware alignment or basic mortising? Well, your wish has been answered with this Single Spindle Horizontal Boring Machine. 5/8" drill bit capacity. Direct drive power transfer. Approximate shipping weight of 160 lbs.

This 5 speed bench-top radial drill press features variable swing up to 34" and pivoting heads for drilling at just about any angle. Truly versatile! Specifications: *Motor: 1/2-HP, single-phase, 110V *Overall Height: 31-1/2" *Spindle travel: 3-1/4" *Number of speeds: 5 *Drill chuck: 1/8"-5/8" *Range of speeds: 550, 880, 1520, 2490, 3470 RPM *Swing: 34" maximum *Table: Precision ground cast iron *Table size: 8-5/8" x 9" *Table swing: 360° *Table tilts: 90° in both directions *Approx. shipping weight: 97 lbs. Please see item G7946 for a floor model of this machine.

When this drill press arrives at your door, you're gonna say "Holy Moley!". The MT #4 spindle taper, 1-1/2" H.P. motor and precision ground T-slotted table will handle just about any drilling job. Includes built-in light (bulb not included). Specifications: *Motor size: 1-1/2 HP, Single-Phase *Voltage: 110V/220V *Switch & wiring: 110V only *Overall height: 70-3/4" *Spindle travel: 4-3/4" *Number of speeds: 12 *Drill chuck: 5/8" *Spindle taper: MT #4 *Range of speeds: 210, 310, 400, 440, 630, 670, 1260, 1430, 1650, 2050, 2350, 3300 RPM *Swing: 20" *Drilling capacity: 1-1/4" steel *Table: precision ground cast iron *Table size: 18-3/4" x 16-3/4" *Approx. shipping weight: 331 lbs.

All the features and dependability of an expensive industrial grade drill press - with a price tag that's astoundingly low. Includes built-in light (bulb not included).

These centers will improve your drilling accuracy. Zinc plated steel centers perform three basic alignments. For doweling, the centers will make correctly positioned marks for precise drilling of your second set of dowel holes. For properly positioning chair rungs or other spindle work, slip a center over the end of your tenon and use pinpoint the location for boring. To find the center of a dowel slip a center over the end and tap lightly. An internal point will mark the exact center for lathe work. .

These centers will improve your drilling accuracy. Zinc plated steel centers perform three basic alignments. For doweling, the centers will make correctly positioned marks for precise drilling of your second set of dowel holes. For properly positioning chair rungs or other spindle work, slip a center over the end of your tenon and use pinpoint the location for boring. To find the center of a dowel slip a center over the end and tap lightly. An internal point will mark the exact center for lathe work. .